yinjingjing927@Hotmail.com

+86-535-2318538

Product Categories

Laizhou Yunlong Plastics Products Co.,Ltd

Address: Shahe Town, Laizhou City, Shandong Province

Contact: Han chunyu

TEL: 86-535-2318538

Phone: 86-15865621668

E-mail: yinjingjing927@Hotmail.com

www.yunlongrubber.comĀ 

Home > News > Content
Water Hose Product Full Name Oct 27, 2017

Water Hose Product full name

Water supply cable hose - the type of hose

Many types of hose, uniform naming method is the material, structure, use the different name, the product called: material + structure (process) + use + hose. For example: cotton thread weaving oil hose; steel wire wound pressure hose.

Structure The hose structure is usually divided into: inner layer, outer layer and skeleton layer (or intermediate layer). The inner layer directly under the wear and erosion of the transmission medium; the outer layer protects the inner tube from the external environment from damage and erosion; the skeleton layer is the pressure layer of the hose, giving the tube strength and rigidity. The working pressure of the hose depends on the material and structure of the skeleton layer.

Full glue hose according to the different skeleton layer, the common hose are: full plastic hose (no fabric material) Cloth hose (skeleton layer for the cloth layer)

(Skeleton layer for the woven steel wire or fabric) Winding hose (skeleton layer for the wire or wire rope winding layer, the hose is a layer of metal spiral, suitable for negative pressure conditions) Tolerance is common in the 80 ~ 600MPa or even higher pressure)

A type of tubular rubber product used to transport gas, liquid, slurry or granular material. From the inside and outside the adhesive layer and skeleton layer composition, the skeleton layer of material available cotton fiber, all kinds of synthetic fiber, carbon fiber or asbestos, steel wire and so on. Rubber hose is made of neoprene rubber, nitrile rubber; acid and alkali resistant, high temperature resistant hose adopts ethylene propylene rubber, fluorine rubber or silicone rubber, etc. It is made of natural rubber, styrene butadiene rubber or butadiene rubber.

The name of the hose

Many types of hose, uniform naming method is the material, structure, use the different name, the product called: material + structure (process) + use + hose. For example: cotton thread weaving oil hose; steel wire wound pressure hose.

structure

Hose structure is usually divided into: inner layer, outer layer and skeleton layer (or middle layer). The inner layer directly under the wear and erosion of the transmission medium; the outer layer protects the inner tube from the external environment from damage and erosion; the skeleton layer is the pressure layer of the hose, giving the tube strength and rigidity. The working pressure of the hose depends on the material and structure of the skeleton layer. Hydraulic hose assembly tube is a rubber product, in the course of the use of the following points to note:

1. For long-term use of high-pressure hose to be regularly checked. (Skin wear and aging degree, the degree of joint wear, it is recommended to check once a week).

2. High-pressure hose surface cleaning work. (Daily cleaning hose surface of the production material to keep clean. Focus on the removal of the hose surface corrosive material)

3. When the hose is often in contact with the frictional surface, use protective bushings. Reduce the friction coefficient, to prevent aging, increase the service life.

4. Has been used in the hose, the need for a long time when not in the tube to clear the material. Access media is closed.

5. Do not leave the hose outdoors while storing the hose. To avoid other factors such as sunshine caused by hose aging and pollution.

6. High pressure hose is not recommended for repair. Found hidden immediately replaced. To avoid accidents and personal injury.